Sensor development and calibration for acoustic neutrino detection in ice

• Main Authors: Timo Karg, Martin Bissok, Karim Laihem, Benjamin Semburg, Delia Tosi
• Other Authors: The Pennsylvania State University CiteSeerX Archives
• Format: Text
• Language: English
• Subjects: acoustic neutrino detection; thermoacoustic; South Pole; South pole
• Online Access: http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.313.7257; http://arxiv.org/pdf/0907.3561v1.pdf

Abstract. A promising approach to measure the expected low flux of cosmic neutrinos at the highest energies (E> 1 EeV) is acoustic detection. There are different in-situ test installations worldwide in water and ice to measure the acoustic properties of the medium with regard to the feasibility of acoustic neutrino detection. The parameters of interest include attenuation length, sound speed profile, background noise level and transient backgrounds. The South Pole Acoustic Test Setup (SPATS) has been deployed in the upper 500 m of drill holes for the IceCube neutrino observatory at the geographic South Pole. In-situ calibration of sensors under the combined influence of low temperature, high ambient pressure, and ice-sensor acoustic coupling is difficult. We discuss laboratory calibrations in water and ice. Two new laboratory facilities, the Aachen Acoustic Laboratory (AAL) and the Wuppertal Water Tank Test Facility, have been set up. They offer large volumes of bubble free ice (3 m 3) and water (11 m 3) for the development, testing, and calibration of acoustic sensors. Furthermore, these facilities allow for verification of the thermoacoustic model of sound generation through energy deposition in the ice by a pulsed laser. Results from laboratory measurements to disentangle the effects of the different environmental influences and to test the thermoacoustic model are presented.