Exhaust Ventilation of Deep Cuts Using a Continuous-Mining Machine

• Other Authors: Volkwein, Jon C., Ruggieri, S. K., McGlothlin, C., Kissell, Fred N.
• Language: unknown
• Subjects: NIOSH; Beaver Creek
• Online Access: http://stacks.cdc.gov/view/cdc/10480/

The Bureau of Mines, Foster-Miller Inc., and Beaver Creek Coal Co. have evaluated the ability of a new system to ventilate a 40-ft-deep cut. A remote-control continuous-mining machine, in a 7-ft-thick seam, with exhausting brattice was fitted with an improved sprayfan system plus additional forward and reverse pointing sprays. Static and dynamic tests using tracer gas were conducted in a full-scale model and under-ground to measure the effectiveness of exhaust face ventilation for various deep-cutting mine and spray configurations. When compared to a lO-ft primary ventilation brattice, the extended-cut spray system consistently provided better face ventilation at all configurations up to and including a 40-ft brattice setback. The system also provided good dust protection and visibility for the machine operator. Another safety advantage is the elimination of the need to set temporary roof supports to maintain the ventilation brattice.