Topological modeling of methane hydrate crystallization from low to high water cut emulsion systems

• Published in: Fluid Phase Equilibria
• Main Authors: Melchuna, Aline, Cameirão, Ana, Herri, Jean-Michel, Glénat, Philippe
• Other Authors: Laboratoire Georges Friedel (LGF-ENSMSE), Université de Lyon-Centre National de la Recherche Scientifique (CNRS)-École des Mines de Saint-Étienne (Mines Saint-Étienne MSE), Institut Mines-Télécom Paris (IMT)-Institut Mines-Télécom Paris (IMT), Département PROcédés Poudres, Interfaces, Cristallisation et Ecoulements (PROPICE-ENSMSE), École des Mines de Saint-Étienne (Mines Saint-Étienne MSE), Institut Mines-Télécom Paris (IMT)-Institut Mines-Télécom Paris (IMT)-SPIN, Centre Sciences des Processus Industriels et Naturels (SPIN-ENSMSE), TOTAL-Scientific and Technical Center Jean Féger (CSTJF), TOTAL FINA ELF, TOTAL – CSTJF
• Format: Article in Journal/Newspaper
• Language: English
• Published: HAL CCSD 2016
• Subjects: FBRM; AA-LDHI; Crystallization; Hydrates; Flow assurance; [SPI.GPROC]Engineering Sciences [physics]/Chemical and Process Engineering; Methane hydrate
• Online Access: https://hal.archives-ouvertes.fr/hal-01235142; https://hal.archives-ouvertes.fr/hal-01235142/document; https://hal.archives-ouvertes.fr/hal-01235142/file/AC-FPE-413-Orig.pdf; https://doi.org/10.1016/j.fluid.2015.11.023

International audience Hydrate formation and remediation in oil flowlines facilities represent a major concern for oil industry in respect of capital and operational costs. It is necessary to have a better understanding on the hydrate formation process to be more efficient in hydrate prevention, especially in respect to additive dosage. This work is a contribution to enhance the knowledge of hydrate formation at high water cuts, by introducing new techniques of analysis in the Archimede flow loop: a Focus Beam Reflectance Measurement (FBRM) probe and a Particle Video Microscope (PVM) probe. These results will be supported by Pressure Drop, Flow Rate, Density and Temperature probes. From experimental observations, a method to determine the continuous phase (water or oil) of the system under flowing is proposed. It is based on the time evolution of the most representative chord class measured by the FBRM. In order to predict morphology and size of hydrates, a topological model was developed. It represents hydrate crystallization from different emulsion systems with and without low dosage of hydrate inhibitor additive (anti-agglomerant type). The key parameters are the gas transfer rate at the gas/liquid interface and at the hydrocarbon/water interface, and the role of the hydrocarbon as gas transfer phase. Gas/liquid transfer is low as water phase remains the continuous phase, but is enhanced as hydrocarbon content is increased. Hydrocarbon gas transfer property is depleted as continuous and rigid crust is formed around droplets, especially in well dispersed emulsions. This behavior is highlighted for experiments without anti-agglomerant additive (AA-LDHI) and at high water cut, as a small fraction of hydrocarbon is well dispersed in the water continuous phase. The maximum hydrate plugging risk is in between 70% and 30% water cut (intermediate and low water cut). In this work, experiments at high water cuts (more than 80%) never plug. In order to prevent agglomeration, the AA-LDHI works better if it shows a ...