A Minimal Architecture for Real-Time Lunar Surface Positioning Using Joint Doppler and Ranging

A positioning solution for users on the lunar surface is required for the success of upcoming missions. Technological advancements have enabled the use of accurate range and Doppler measurements from a lunar orbiter. This article introduces a filtered approach of joint Doppler and ranging (JDR), a m...

Full description

Bibliographic Details
Published in:IEEE Transactions on Aerospace and Electronic Systems
Main Authors: Jun, William W., Cheung, Kar-Ming, Lightsey, Edgar Glenn, Lee, Charles
Format: Article in Journal/Newspaper
Language:unknown
Published: IEEE 2022
Subjects:
Online Access:https://doi.org/10.1109/taes.2021.3122876
_version_ 1821715195011006464
author Jun, William W.
Cheung, Kar-Ming
Lightsey, Edgar Glenn
Lee, Charles
author_facet Jun, William W.
Cheung, Kar-Ming
Lightsey, Edgar Glenn
Lee, Charles
author_sort Jun, William W.
collection Caltech Authors (California Institute of Technology)
container_issue 2
container_start_page 1367
container_title IEEE Transactions on Aerospace and Electronic Systems
container_volume 58
description A positioning solution for users on the lunar surface is required for the success of upcoming missions. Technological advancements have enabled the use of accurate range and Doppler measurements from a lunar orbiter. This article introduces a filtered approach of joint Doppler and ranging (JDR), a minimal architecture that requires as few as one lunar orbiter to perform 3D positioning of lunar surface vehicles. The simulated performance of JDR and Doppler-based positioning methods is compared. Two lunar satellites are simulated: The lunar relay satellite (LRS) in a 12-h frozen orbit with its apogee above the lunar south pole, and the lunar reconnaissance orbiter in a 2-h Polar orbit. The analysis interval is 8 h over a single LRS ground pass. The ground pass has only a few intervals where both satellites are visible to the user and reference station on the lunar south pole. Navigation nodes are simulated with synchronized clocks for all methods. Measurement and satellite ephemeris errors are embedded into a Monte Carlo simulation to evaluate 3D positioning error. The relative JDR method obtains the lowest and most consistent overall 3D root mean squared error, averaging around 10–15 m. The absolute positioning methods are limited by satellite orbit height and other factors. Ultimately, JDR is able to provide reasonably accurate positioning knowledge to users with a minimal required infrastructure. Though this article introduces JDR on the Moon, the same architecture can be applied for other celestial bodies like Venus, Mars, Titan, and asteroids. © 2021 IEEE. Manuscript received January 14, 2021; revised May 29, 2021 and September 13, 2021; released for publication September 13, 2021. Date of publication October 27, 2021; date of current version April 12, 2022. Refereeing of this contribution was handled by J. N. Gross. This work was supported in part by the National Aeronautics and Space Administration (NASA), in part by the Space Communication and Navigation (SCaN) Program, and in part by a NASA Space ...
format Article in Journal/Newspaper
genre South pole
genre_facet South pole
geographic South Pole
Venus
geographic_facet South Pole
Venus
id ftcaltechauth:oai:authors.library.caltech.edu:g6cjr-csr55
institution Open Polar
language unknown
long_lat ENVELOPE(-57.842,-57.842,-61.925,-61.925)
op_collection_id ftcaltechauth
op_container_end_page 1376
op_doi https://doi.org/10.1109/taes.2021.3122876
op_relation https://doi.org/10.1109/taes.2021.3122876
eprintid:115232
op_rights info:eu-repo/semantics/closedAccess
Other
op_source IEEE Transactions on Aerospace and Electronic Systems, 58(2), 1367-1376, (2022-04)
publishDate 2022
publisher IEEE
record_format openpolar
spelling ftcaltechauth:oai:authors.library.caltech.edu:g6cjr-csr55 2025-01-17T00:51:57+00:00 A Minimal Architecture for Real-Time Lunar Surface Positioning Using Joint Doppler and Ranging Jun, William W. Cheung, Kar-Ming Lightsey, Edgar Glenn Lee, Charles 2022-04 https://doi.org/10.1109/taes.2021.3122876 unknown IEEE https://doi.org/10.1109/taes.2021.3122876 eprintid:115232 info:eu-repo/semantics/closedAccess Other IEEE Transactions on Aerospace and Electronic Systems, 58(2), 1367-1376, (2022-04) Electrical and Electronic Engineering Aerospace Engineering info:eu-repo/semantics/article 2022 ftcaltechauth https://doi.org/10.1109/taes.2021.3122876 2024-09-25T18:46:46Z A positioning solution for users on the lunar surface is required for the success of upcoming missions. Technological advancements have enabled the use of accurate range and Doppler measurements from a lunar orbiter. This article introduces a filtered approach of joint Doppler and ranging (JDR), a minimal architecture that requires as few as one lunar orbiter to perform 3D positioning of lunar surface vehicles. The simulated performance of JDR and Doppler-based positioning methods is compared. Two lunar satellites are simulated: The lunar relay satellite (LRS) in a 12-h frozen orbit with its apogee above the lunar south pole, and the lunar reconnaissance orbiter in a 2-h Polar orbit. The analysis interval is 8 h over a single LRS ground pass. The ground pass has only a few intervals where both satellites are visible to the user and reference station on the lunar south pole. Navigation nodes are simulated with synchronized clocks for all methods. Measurement and satellite ephemeris errors are embedded into a Monte Carlo simulation to evaluate 3D positioning error. The relative JDR method obtains the lowest and most consistent overall 3D root mean squared error, averaging around 10–15 m. The absolute positioning methods are limited by satellite orbit height and other factors. Ultimately, JDR is able to provide reasonably accurate positioning knowledge to users with a minimal required infrastructure. Though this article introduces JDR on the Moon, the same architecture can be applied for other celestial bodies like Venus, Mars, Titan, and asteroids. © 2021 IEEE. Manuscript received January 14, 2021; revised May 29, 2021 and September 13, 2021; released for publication September 13, 2021. Date of publication October 27, 2021; date of current version April 12, 2022. Refereeing of this contribution was handled by J. N. Gross. This work was supported in part by the National Aeronautics and Space Administration (NASA), in part by the Space Communication and Navigation (SCaN) Program, and in part by a NASA Space ... Article in Journal/Newspaper South pole Caltech Authors (California Institute of Technology) South Pole Venus ENVELOPE(-57.842,-57.842,-61.925,-61.925) IEEE Transactions on Aerospace and Electronic Systems 58 2 1367 1376
spellingShingle Electrical and Electronic Engineering
Aerospace Engineering
Jun, William W.
Cheung, Kar-Ming
Lightsey, Edgar Glenn
Lee, Charles
A Minimal Architecture for Real-Time Lunar Surface Positioning Using Joint Doppler and Ranging
title A Minimal Architecture for Real-Time Lunar Surface Positioning Using Joint Doppler and Ranging
title_full A Minimal Architecture for Real-Time Lunar Surface Positioning Using Joint Doppler and Ranging
title_fullStr A Minimal Architecture for Real-Time Lunar Surface Positioning Using Joint Doppler and Ranging
title_full_unstemmed A Minimal Architecture for Real-Time Lunar Surface Positioning Using Joint Doppler and Ranging
title_short A Minimal Architecture for Real-Time Lunar Surface Positioning Using Joint Doppler and Ranging
title_sort minimal architecture for real-time lunar surface positioning using joint doppler and ranging
topic Electrical and Electronic Engineering
Aerospace Engineering
topic_facet Electrical and Electronic Engineering
Aerospace Engineering
url https://doi.org/10.1109/taes.2021.3122876