Trenngitter - eine Alternative zu den Trichternetzen in der Garnelenfischerei

• Main Author: Wienbeck, Harald
• Format: Article in Journal/Newspaper
• Language: German
• Published: 1995
• Subjects: Fisheries; Engineering; Gadus morhua
• Online Access: http://aquacomm.fcla.edu/4233; http://aquaticcommons.org/4233/; http://aquaticcommons.org/4233/1/INFN_42_1_36-42.PDF

Experimental fishing trials were conducted in the Elbe Estuary using an experimental 3 m-standard beamtrawl. To avoid the by-catch of fish, a sorting grid was used. The elliptical grid was constructed of 6 mm diameter stainless steel bars with a spacing of 13 mm between the bars and housed in a cylindrical frame of 400 mm diameter. It was installed in the extension piece just in front of the codend angled at 45°, with a fish outlet at the top. A series of 10 tows of 15 minutes duration at a towing speed of 3 kn was done. The catch of the main codend was compared with the catch separated by the sorting grid. This achieved a reduction of 56 % of plaice (Pleuronectes platessa), 75 % of flounder (Platichthys flesus), 99 % of whiting (Merlangius merlangus), 94 % of cod (Gadus morhua) and 49 % of smelt (Osmerus eperlanus) with a mean loss of 43 % of shrimps (Crangon crangon). English grid trials in the Humber estuary using a flapper set or guiding funnel in front of the sorting grid device demonstrated reasonable lower escapement rates for fish and shrimps.