Tide Gauge Records 2000-2011, Zhong Shan, Larsemann Hills, Australian Antarctic Territory

• Format: Dataset
• Language: unknown
• Published: Australian Ocean Data Network
• Subjects: oceans; elevation; EARTH SCIENCE > OCEANS > SEA SURFACE TOPOGRAPHY > SEA SURFACE HEIGHT; TIDES > TIDAL COMPONENTS; TIDAL CURRENTS; TIDAL HEIGHT; TIDAL RANGE; GAUGE; ZHONG SHAN; ANTARCTICA; SEA LEVEL; TIDE; SOUTHERN OCEAN; TIDE GAUGE; TIDES; TIDE GAUGES; MOORINGS; CEOS; AMD/AU; AMD; CONTINENT > ANTARCTICA > GEOGRAPHIC REGION > POLAR; Antarctic; Southern Ocean; Australian Antarctic Territory; Psi; Larsemann Hills; Pyramid; Pyramid The; Nella Fjord; Antarc*; Antarctica
• Online Access: https://researchdata.edu.au/tide-gauge-records-antarctic-territory/2819946

Progress Code: completed Statement: The data set from the gauge at Zhong Shan is complete since deployment in February 2000. Pressure and temperature data are retrieved from the submerged gauge when time and weather allow. The records are in hex format. Records are stored as datalogger memory images and must be processed to generate *.tg files. Tidal records are checked for gross errors in height values and obvious timing errors. Further checks are done by NTC during processing. Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring in Nella Fjord in the Larsemann Hills near Zhong Shan station. Tidal records are retrieved from the gauge using an inductive loop lowered through a hole in the ice hence the gauge has been undisturbed since it was deployed. Documentation dated 2001-06-12 Zhong Shan Submerged Tide Gauge The gauge used at Zhong Shan was designed in 1991/2 by Platypus Engineering, Hobart, Tasmania. It was intended to be submerged in about 7 metres of water in a purpose made concrete mooring in the shape of a truncated pyramid. The mooring for the Zhong Shan gauge was cast in concrete at Davis and sling loaded by helicopter to Nella Fjord in the Larsemann Hills and deployed through a hole in the ice. The gauge measures pressure using a Paroscientific Digiquartz Pressure Transducer with a full scale pressure of 30 psi absolute. The accuracy of the transducer is 1 in 10,000 of full scale over the calibrated temperature range. The overall accuracy of the system is better than +/- 3 mm for a known water density. Data is retrieved from the gauges by lowering a coil assembly on the end of a cable over a projecting knob on the top of the gauge and by use of an interface unit, a serial connection can be established to the gauge. Time setting and data retrieval can be then achieved. Data has been retrieved from this gauge once since deployment. The records are complete since deployment. Conversion of raw data to tidal records is done as detailed in document: Details of ...