RV Investigator Voyage IN2018_V06 ADCP Data

• Other Authors: CSIRO (hasAssociationWith), CSIRO O&A, Information & Data Centre (pointOfContact), CSIRO Oceans & Atmosphere - Hobart (hasAssociationWith), CSIRO/Oceans and Atmosphere (hasAssociationWith), Data Officer (AR), Hobart (processor), Roubicek, Andres (originator)
• Format: Dataset
• Language: unknown
• Published: Australian Ocean Data Network
• Subjects: oceans; Earth Science | Oceans | Ocean Circulation | Ocean Currents; Marine National Facility; Research Voyage: IN2018_V06; Status and recovery of deep-sea coral communities on seamounts in iconic Australian marine reserves; Vessel Data: ADCP; Ship: Investigator (RV); ADCP (Acoustic Doppler Current Profiler); Global / Oceans | Southern Ocean; Marine Features (Australia) | Derwent Estuary; TAS; Coastal Waters (Australia) | Tasmania Coast East and Southeast; Current direction in the water body; Current speed in the water body; Eastward current velocity in the water body; Northward current velocity in the water body; Upward current velocity in the water body; current profilers; research vessel; Southern Ocean
• Online Access: https://researchdata.edu.au/rv-investigator-voyage-adcp-data/1369688

Progress Code: completed Maintenance and Update Frequency: asNeeded Statement: Data source: original field data. Data processing and quality control: Performed by Karl Malakoff, O&A DAP Group. Note that 1min average data is provided as a special request, however it is unedited and has data quality implications. For general use, the 5min average data (os150nb.nc) should be used. Credit ADCP data processed by Karl Malakoff (CSIRO O&A, MNF Data Acquisition and Processing group). This record describes the Acoustic Doppler Current Profiler (ADCP) data collected from the Marine National Facility RV Investigator voyage IN2018_V06, titled: "Status and recovery of deep-sea coral communities on seamounts in iconic Australian marine reserves." The voyage took place from Hobart (TAS) to Hobart between November 23 and December 19, 2018. Data was collected during in2018_v06 for the entire voyage. Data was collected using UHDAS and post-processed using CODAS. Data was collected with the RDI Ocean Surveyor 75kHz and 150kHz ADCP, which were run in narrow band mode with 16m and 8m bins respectively. Bottom tracking was turned on while in shallow water for personal transfers and departing and arriving in Hobart. The ADCPs were occasionally turned off to reduce noise while troubleshooting USBL issues resulting in some gaps in the data. Internal triggering was used as external triggering was found to be unstable on previous voyages. The port drop keel was at 2m for the duration of the voyage. See the voyage computing and electronics report for more details regarding data acquisition. This dataset was processed and then archived within the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart.