Use of Internal Structural Steel Strip Bands as Shear Reinforcement in Concrete Beams

A Master of Science thesis in Civil Engineering by Salma Nasser Korany Megahed Ahmed entitled, "Use of Internal Structural Steel Strip Bands as Shear Reinforcement in Concrete Beams," submitted in December 2017. Thesis advisor is Dr. Sami Tabsh. Soft and hard copy available. A new method o...

Full description

Bibliographic Details
Main Author: Ahmed, Salma Nasser Korany Megahed
Other Authors: Tabsh, Sami
Format: Thesis
Language:English
Published: 2017
Subjects:
Online Access:http://hdl.handle.net/11073/9157
Description
Summary:A Master of Science thesis in Civil Engineering by Salma Nasser Korany Megahed Ahmed entitled, "Use of Internal Structural Steel Strip Bands as Shear Reinforcement in Concrete Beams," submitted in December 2017. Thesis advisor is Dr. Sami Tabsh. Soft and hard copy available. A new method of lateral shear reinforcement is investigated in which a reinforced concrete (RC) beam is transversely reinforced by Internal Structural Steel Strip Bands (ISSSBs), instead of conventional stirrups. The steel strip bands are cut to a specified width from structural steel squares or rectangular tubes of desired thickness, and the size of the bands depends on the cross-section of the RC beam. This method has the potential of improving the strength and ductility characteristics of RC beams subjected to shear without increasing the amount of steel reinforcement and congesting the steel rebar cage. With the use of ISSSBs, it is believed that the beam reinforcement will be less congested and the concrete core of the beam will be better confined; thus, delaying the formation of cracks and increasing the ductility. A comprehensive literature review on the subject has revealed no published work on this new type of transverse reinforcement; hence, no established design guidelines are in place for such a system. The purpose of the study is to check the applicability of current structural design codes to concrete beams reinforced with ISSSBs and develop appropriate recommendations and design guidelines. To achieve objectives of the study, an experimental testing program was implemented in the laboratory on half-scale beam specimens to compare the performance of ISSSB reinforced beams with the corresponding performance of stirrups reinforced beams in terms of shear strength, stiffness and ductility. The experimental program was complemented with a theoretical analysis. The study considered various cross-section dimensions, shear-span-to-depth ratios, transverse steel volumetric ratios, and strip band thickness-to-width ratios. Results of ...