Spectral Reflectance Measurements ARCSS grid Barrow, Alaska 2012

• Main Authors: Craig E. Tweedie, Steven F. Oberbauer
• Format: Dataset
• Language: unknown
• Published: Arctic Data Center 2013
• Subjects: EARTH SCIENCE > ATMOSPHERE > ATMOSPHERIC ELECTRICITY > ATMOSPHERIC CONDUCTIVITY; EARTH REMOTE SENSING INSTRUMENTS > PASSIVE REMOTE SENSING > SPECTROMETERS/RADIOMETERS > SPECTROMETERS > SPECTROMETERS; FIELD SURVEY; GRID; 1 KILOMETER; MONTHLY TO ANNUAL; Arctic; Barrow; Alaska
• Online Access: https://search.dataone.org/view/urn:uuid:801d1203-96ca-404d-86d8-c9487d1cf775

Spectral measurements were taken on a 30 plot subset within the Arctic System Science (ARCSS) grid in Barrow, Alaska during the summer of 2012. Spectral measurements were taken from the north eastern most corner of each plot. The subset is located from D2-D7 & H2-H7 within the 1 km^2 ARCSS grid. The instrumentation used was a Unispec DC (dual channel) spectrometer with fiber optics as sensors. A manfrotto tri-pod with an arm attachment was used to hold the fibers and sensors in place while taking the spectral measurements. The arm had 2 bubble levels to assist in keeping the sensors as level as possible. The calculated foot print cover is about 50-60 cm using a tri-pod height of 1.62 meters. The sensor angle for each scan was 20 degrees. Extra reference scans were taken on a 100% reflective white board surface. Some plots contain crosshairs that are used for point framing purposes and might have an effect on the reflectivity of each scan. Therefore, an extra scan was taken adjacent to each plot on the west side.