Spectral Reflectance Measurements ARCSS grid Barrow, Alaska 2015 _

• Main Author: Steven F. Oberbauer
• Format: Dataset
• Language: unknown
• Published: Arctic Data Center 2015
• Subjects: Barrow; Alaska
• Online Access: https://doi.org/10.18739/A2MP0N

Spectral measurements were taken on a 30 plot subset within the ARCSS grid in Barrow, Alaska during the summer of 2015. Spectral measurements were taken from the north eastern most corner of each plot. The subset is located from D2-D7 & H2-H7 with the 1 km^2 ARCSS grid. The instrumentation used was a Unispec dual channel (DC) spectometer with fiber optics as sensors. A Manfrotto tripod with an arm attachment was used to hold the fibers and sensors in place while taking the spectral measurements. The arm had 2 bubble levels to assist in keeping the sensors as level as possible. The calculated foot print cover is about 50-60 cm using a tripod height of 1.62 meters. The sensor angle for each scan was 20 degrees. Extra reference scans were taken on a 100% reflective white board surface. Some plots contain crosshairs that are used for point framing purposes and might have an effect on the reflectivity of each scan. Therefore, an extra scan was taken adjacent to each plot on the west side.