Spectral Reflectance Measurements NIMS grid Toolik Lake, Alaska 2012
Spectral measurements were taken at each meter of the Networked Info-mechanical System (NIMS) grid in Atqasuk, Alaska during the summer of 2012. Measurements were taken from the edge of each white board located at each meter aimed at the plots. The instrumentation used was a Unispec dual channel (DC...
Main Authors: | , |
---|---|
Format: | Dataset |
Language: | unknown |
Published: |
Arctic Data Center
2013
|
Subjects: | |
Online Access: | https://doi.org/10.18739/A25S79 |
Summary: | Spectral measurements were taken at each meter of the Networked Info-mechanical System (NIMS) grid in Atqasuk, Alaska during the summer of 2012. Measurements were taken from the edge of each white board located at each meter aimed at the plots. The instrumentation used was a Unispec dual channel (DC) spectrometer with fiber optics as sensors. A manfrotto tri-pod with an arm attachment was used to hold the fibers and sensors in place while taking the spectral measurements. The arm had 2 bubble levels to assist in keeping the sensors as level as possible. The calculated foot print cover is about 50-60 cm using a tri-pod height of 1.62 meters. The sensor angle for each scan is 20 degrees. Extra reference scans were taken on a 100 percent reflective white board surface. |
---|