Evaluation of a portable electrode array for a resistivity fish counter
Abstract This study aimed to develop and test an electrode array for a resistivity fish counter that could be easily installed in a small river without a weir. An electrode array consisting of three steel cables laid in parallel across the stream channel and connected to a microprocessor‐based count...
| Published in: | Fisheries Management and Ecology |
|---|---|
| Main Authors: | , , |
| Format: | Article in Journal/Newspaper |
| Language: | English |
| Published: |
Wiley
1996
|
| Subjects: | |
| Online Access: | http://dx.doi.org/10.1111/j.1365-2400.1996.tb00137.x https://api.wiley.com/onlinelibrary/tdm/v1/articles/10.1111%2Fj.1365-2400.1996.tb00137.x https://onlinelibrary.wiley.com/doi/pdf/10.1111/j.1365-2400.1996.tb00137.x |
| Summary: | Abstract This study aimed to develop and test an electrode array for a resistivity fish counter that could be easily installed in a small river without a weir. An electrode array consisting of three steel cables laid in parallel across the stream channel and connected to a microprocessor‐based counter was tested in an Atlantic salmon, Salmo salar L., spawning tributary. The accuracy of the counter was assessed by observing fish movements with closed‐circuit television. Most salmon moving upstream were registered correctly (90% overall). Detection of downstream movement was less reliable (60% overall), as a consequence of downstream swimming behaviour. The accuracy of the downstream count was improved by tensioning the cable electrodes, but remained lower than that of the upstream count. Since salmon swam repeatedly up‐ and downstream, this discrepancy resulted in an overestimate of the net upstream count. The accuracy of the downstream count needs to be improved before a bed‐mounted electrode array could be used for routine salmon counting. |
|---|