Investigations Into the Mechanical Properties of Alpine Snow-Packs

• Published in: Journal of Glaciology
• Main Authors: Keeler, C. M., Weeks, W. F.
• Format: Article in Journal/Newspaper
• Language: English
• Published: Cambridge University Press (CUP) 1968
• Subjects: Earth-Surface Processes; Ballard; Bridger; Journal of Glaciology
• Online Access: http://dx.doi.org/10.1017/s0022143000031038; https://www.cambridge.org/core/services/aop-cambridge-core/content/view/S0022143000031038

Data on the physical properties of seasonal alpine snow have been collected from the Beartooth Mountains near Cooke City, Montana (elevation ≈3000 m) and the Bridger Range near Bozeman, Montana (elevation ≈2200 m). Systematic measurements of snow density, temperature, structure, ram and Canadian hardness, centrifugal tensile strength and shear strength measured with a shear box and several types of shear vanes are included. Test results were grouped according to gross snow types (cohesive fine-grained “winter” snow. depth hoar, new snow, etc.) and whether the snow was wet or dry. Then interrelations between the different test parameters were studied. A plot of ram number versus density for winter snow gave a log-linear relation similar to that suggested for polar snows. Both shear-vane and centrifugal-tensile results when plotted as a function of porosity are well described by the negative exponential relation suggested by Ballard and Feldt. Depth hoar and wet snow invariably have lower strength values at any given density. There is an excellent one-to-one agreement between values obtained with the shear vane and the shear box. Several field experiments were performed to study the sources of error in making in-situ mechanical tests on snow without utilizing a pit wall. Statistical analysis of the results shows that the main factor contributing to the experimental scatter is lateral inhomogeneity in the snow cover. There was no significant difference between the results of different operators. The standard deviation of a group of strength tests is shown to be directly proportional to the mean value of the group. This indicates that a logarithmic transformation should be made in handling snow strength results in order to stabilize the variance. It is emphasized that the systematic relations between snow properties invariably become obscured when different snow “types” are indiscriminately grouped together.