A Method of Determining the Strain-Rate Tensor at the Surface of a Glacier
Abstract The rate of strain tensor at a point on the surface of a glacier may be determined by setting up a number of stakes in a pattern and measuring the rate of change of the distances between them. A suitable pattern consists of four stakes at the corners of a square with one stake at the center...
Published in: | Journal of Glaciology |
---|---|
Main Author: | |
Format: | Article in Journal/Newspaper |
Language: | English |
Published: |
Cambridge University Press (CUP)
1959
|
Subjects: | |
Online Access: | http://dx.doi.org/10.1017/s0022143000017093 https://www.cambridge.org/core/services/aop-cambridge-core/content/view/S0022143000017093 |
Summary: | Abstract The rate of strain tensor at a point on the surface of a glacier may be determined by setting up a number of stakes in a pattern and measuring the rate of change of the distances between them. A suitable pattern consists of four stakes at the corners of a square with one stake at the center. Five such patterns were used on Austerdalsbreen, Norway, in August 1956. The problem is to deduce the best values of the 3 independent components of the strain-rate tensor from the 8 measured quantities, and, for this purpose, a least-squares method, invented by Bond for the analogous problem in crystal physics, is used. The principal strain-rates are found to within about ±0.005 yr. −1 and their directions relative to the stake system to within about ±0.5°. The directions and magnitudes of the principal stresses are then deduced from Glen’s flow law and a suitable general theory. The directions of the principal strain-rates are in good agreement with the directions of the crevasses, but the experiment is inconclusive on the question of the magnitude of the stress needed to form a crevasse. |
---|