Dynamic models for impact-initiated stress waves through snow columns
Abstract The objective of this research is to model snow's response to dynamic, impact loading. Two constitutive relationships are considered: elastic and Maxwell-viscoelastic. These material models are applied to laboratory experiments consisting of 1000 individual impacts across 22 snow colum...
Published in: | Journal of Glaciology |
---|---|
Main Authors: | , |
Other Authors: | |
Format: | Article in Journal/Newspaper |
Language: | English |
Published: |
Cambridge University Press (CUP)
2024
|
Subjects: | |
Online Access: | http://dx.doi.org/10.1017/jog.2024.26 https://www.cambridge.org/core/services/aop-cambridge-core/content/view/S0022143024000261 |
Summary: | Abstract The objective of this research is to model snow's response to dynamic, impact loading. Two constitutive relationships are considered: elastic and Maxwell-viscoelastic. These material models are applied to laboratory experiments consisting of 1000 individual impacts across 22 snow column configurations. The columns are 60 cm tall with a 30 cm by 30 cm cross-section. The snow ranges in density from 135 to 428 kg m −3 and is loaded with both short-duration (~1 ms) and long-duration (~10 ms) impacts. The Maxwell-viscoelastic model more accurately describes snow's response because it contains a mechanism for energy dissipation, which the elastic model does not. Furthermore, the ascertained model parameters show a clear dependence on impact duration; shorter duration impacts resulted in higher wave speeds and greater damping coefficients. The stress wave's magnitude is amplified when it hits a stiffer material because of the positive interference between incident and reflected waves. This phenomenon is observed in the laboratory and modeled with the governing equations. |
---|